CONROE · THE WOODLANDS · PORTER · SPRING
Epoxy Flooring Contractor in Conroe, TX
100% solids epoxy with full flake broadcast, a polyaspartic top coat, and built to withstand the Texas heat.
SERVING CONROE, SPRING, HOUSTON AND NEARBY
Texas concrete takes a beating. Your floor should take it back.
Summer heat, humidity and hot tires wear bare concrete down fast, and a coat of paint peels right off it. We grind the slab first so the floor system bonds into the concrete instead of sitting on top of it.
REAL JOB, REAL GARAGE
From stained slab to a floor you will want to show off
This garage started as an oil-stained slab with cracks and years of wear. We ground it back to bare concrete, filled the cracks, rolled on the base coat and threw flake over every inch before sealing it.
- Oil-stained slab ground back to bare concrete
- Cracks filled, base coat rolled on
- Flake broadcast and sealed in about 2 days
WHAT WE INSTALL
Epoxy floors for garages, patios, walkways and more
Pick the finish that fits your space and we handle the rest.
Garage floors
Built for hot tires, oil and Texas summers. Usually done in about 2 days.
Epoxy flake systems
Hand-broadcast color flake under a polyaspartic finish.
Patios and walkways
Slip-resistant flake finishes for covered patios, porches and walkways.
Metallic epoxy
Swirled, one-of-a-kind floors for garages and interiors. Quoted after we see the space.
KNOW YOUR SLAB
Why concrete floors in Conroe crack, stain and peel
Bare concrete is porous, and our summers and humidity are hard on it. Four things do most of the damage.
Heat and hot tires
Hot tires pull up cheap coatings and DIY kits. A floor that is built right takes the heat and stays bonded.
Moisture from the slab
Moisture rises through concrete and pushes coatings off from underneath. We test the slab and add a vapor barrier only when it needs one.
Oil and chemicals soak in
Raw concrete drinks up oil, fuel and cleaners. A sealed floor wipes clean instead of staining for good.
Skipped prep
Most failed floors fail because the concrete was never ground. We diamond grind every floor with dust vacuums running.
HOW WE WORK
Four steps, no shortcuts
Diamond grind
We grind the slab with diamond tooling and dust vacuums so the epoxy bonds to clean, open concrete.
Repair cracks
Minor to moderate cracks get filled and leveled before any coating goes down. It is free with every booking.
Epoxy base and flake
A 100% solids epoxy base goes down, then we broadcast flake over the whole floor by hand.
Seal it
A polyaspartic top coat locks in the flake and leaves a hard surface that sweeps and mops easily.
INCLUDED WITH EVERY BOOKING
Cracks in your garage floor? We fix them free.
We repair minor to moderate cracks before we coat, at no extra charge. Foundation cracks are a different animal, so if we see one we will let you know before any work starts and walk you through your options.
PRICING
Honest pricing, up front
Flake systems start at $5 per square foot with a $1,250 minimum. Here is where most garages land.
Starting prices for flake systems. Metallic floors are priced per job.
RECENT WORK
Real floors from real jobs
GOOGLE REVIEWS
5.0 stars from our neighbors
★★★★★ 20 Google reviews, every one 5 stars
"Texan Epoxy Company coated my patio and driveway in Epoxy Flake and it came out looking great! The quality and craftsmanship of their work is top notch."
NICK GARCIA · GOOGLE REVIEW"Texan Epoxy did an amazing work in my garage. I'm so happy I contracted you guys!!! I'm very satisfied with your work."
EZEQUIEL ACEVEDO · GOOGLE REVIEW"Love the service my floor looks amazing definitely recommend them to everyone. Fast friendly service."
TXNINJA09 · GOOGLE LOCAL GUIDEFLAKE VS THE ALTERNATIVES
Why a flake system beats a DIY kit or a coat of paint
If you have priced this out, you have seen the cheaper options. Here is how they stack up.
Swipe to see all columns →
| Box-store DIY kit | Painted concrete | Texan flake system | |
|---|---|---|---|
| Prep | Often just a cleaner or acid etch | Light cleaning | Diamond ground with dust vacuums |
| Coating | Thin film | Thin paint film | 100% solids epoxy base, full flake, polyaspartic top coat |
| Grip | Slick when wet | Smooth | Flake texture underfoot |
| Cracks | Left as they are | Left as they are | Repaired before coating, at no charge |
| Price | Kit cost plus your weekends | Cheapest up front | One price before we start |
WHERE WE WORK
Serving Conroe and Montgomery County
Our shop is in Conroe, and our crew drives out to the towns below. Not on the list? Call and ask.
MEET THE OWNERS
Ben and Ruby, and a name we protect
Texan Epoxy Company is a husband-and-wife crew from right here in Conroe, Texas. When you call, you talk to the people who do the work. We show up when we say we will and treat your home like ours.
We do all the prep ourselves, so you know it gets done right the first time. Nothing gets handed off to a subcontractor, and an owner is on site while the work happens.
BEFORE YOU CALL
Epoxy flooring questions we hear all the time
How much does an epoxy flake floor cost in Conroe?
Flake systems start at $5 per square foot with a $1,250 minimum. The final price depends on size and the condition of the slab, and you get it free, before any work starts.
How long does installation take?
Garages are usually finished in about two days. Larger spaces take longer, and the schedule goes in your written estimate.
Do you repair cracks in the concrete, and does it cost extra?
Cracks up to moderate size are on us. Foundation cracks aren't included, and we tell you which kind you have after we look at the slab.
What is actually in the floor system?
A 100% solids epoxy base, full flake broadcast, and a polyaspartic top coat. Metallic floors get a urethane top coat instead.
What about moisture coming up through the slab?
We add a moisture vapor barrier only when your slab needs one, so you don't pay for it when you don't need it.
Is epoxy flake slippery?
No. The flake gives the floor texture underfoot, which is a big reason people choose it for garages and patios over a smooth coating.
Does epoxy work outside on a patio in Texas?
Yes. Flake epoxy is a good fit for patios because it sweeps and rinses clean, adds texture underfoot and holds up to Texas weather. We also coat walkways and driveways.
What is the difference between epoxy and polyaspartic?
On our flake floors you get both. The epoxy base bonds to the concrete and holds the flake. The polyaspartic top coat goes on top to protect the finish and make it easy to clean.
Can I get a metallic epoxy floor?
Yes. Metallic floors are custom swirled color under a urethane top coat. Price depends on the design and the size of the space.
Do I have to prepare anything before you arrive?
Clear the garage or patio so we can get to the floor. We handle the grinding, repairs, coating and cleanup.
Which areas do you serve?
We install across Montgomery County and north Houston. Use the address check above or call us, and we will tell you if your street is in range.
Is there a warranty?
Every floor we install is backed by a 5-year workmanship warranty.
How do I get a quote?
Call or text 936-249-6985, email support@texanepoxycompany.com, or use the estimate form on this page. The estimate is free and there is no obligation.
FREE ESTIMATE
Tell us where. We will call you.
Takes about a minute. Free and no obligation.
FIND US
Talk to us before you book
Have a question about your slab, a color, or timing? Call or text and one of the owners will get back to you.
936-249-6985
Open daily, 7am to 8pm
Conroe and the surrounding Montgomery County area
Ready to see your floor finished?
Send a few photos or just call. The estimate is free and there is no obligation.