GRANGERLAND, TEXAS · EAST MONTGOMERY COUNTY
Epoxy flooring in Grangerland, TX
Grangerland began as an oil-field camp and grew into a community of new neighborhoods, working garages and shops. We coat garage, shop, patio and walkway floors across Grangerland and the neighborhoods around it.
GrangerlandEast Montgomery County
Epoxy flooring in Grangerland, TX
From oil-field camp to a growing community
Grangerland sits about ten miles southeast of downtown Conroe, in the part of Montgomery County where the garage is a working part of the property. Trucks, trailers, tools and weekend projects all end up on that slab, and bare concrete gets ugly fast.
That is what our system is built for. We diamond-grind the concrete, repair cracks, lay a 100% solids epoxy base, broadcast flake for traction and seal it with a polyaspartic top coat. The finished floor shrugs off oil, hot tires and UV, and it mops clean instead of needing a scrub brush.
Grangerland has older homes near the original crossroads and brand-new neighborhoods being built nearby. We quote both the same way: a free visit, a look at the slab you actually have and a clear price before any work starts.
What we coat in Grangerland, TX
Garages, shops and patios
Four of the jobs we do most around Grangerland.
Garage floors
One to four car garages, from older slabs to brand-new builds, finished in flake with a polyaspartic top coat.
See garage floors →Shop floors
Workshops, barns and storage buildings that need a floor built for tools and traffic.
See commercial floors →Metallic floors
A swirled, glossy metallic finish for a garage or room that is meant to impress.
See metallic floors →Explore our floors: garage floors, patio floors, walkway floors, metallic floors, solid color floors, polyaspartic floors and commercial floors.
Finished floors
The kind of floor Grangerland garages get
A few recent flake floors with a polyaspartic top coat.
Epoxy flooring in Grangerland, TX
A camp that grew into a community
Grangerland began as a camp. After the Conroe oilfield was discovered in December 1931, Don D. Granger, son of the community's founder Dr. Edwin Granger, built houses for oil-field workers, and the place became known as Granger's Camp.
Today the crossing of FM 3083 and FM 2090 is the center of the community, about ten miles southeast of downtown Conroe and roughly 30 miles north of Houston. New neighborhoods are going up nearby, and we coat garages, shops, patios and walkways across the area.
Grangerland history
How a camp became Grangerland
The name is a family name, and the family is the reason the place exists.
The Granger land
Dr. Edwin Granger buys land and begins a community in what is now east central Montgomery County.
Oil changes everything
Oil is discovered near Conroe, opening the Conroe oilfield and bringing a wave of workers who need housing.
Granger's Camp
Don D. Granger, a son of the founder, builds houses for oil-field workers. The settlement is known as Granger's Camp.
A community takes the name
The camp gains a store, a community center and churches, and the surrounding area comes to be called Grangerland.
In your estimate
What we quote for a Grangerland garage or shop
Whether it is a two-car garage or a full shop, the estimate lists every step.
- Full diamond grind of the slab
- Crack repair at no charge for minor to moderate cracks
- A tough 100% solids epoxy base
- Flake in the blend you pick
- Polyaspartic top coat
- Five-year workmanship warranty
What local conditions mean for your floor
Built for working garages
What we plan around in Grangerland.
Trucks, trailers and tools
Heavy loads and rolling tool chests are hard on thin coatings. A thick 100% solids epoxy base with a polyaspartic top coat holds up to the traffic.
Mud, gravel and dust
Boots and tires bring the yard into the garage. A sealed floor sweeps and hoses clean instead of holding onto grit.
Fresh slabs, bare concrete
Builders hand over new garages as plain concrete that stains quickly. Coating early keeps oil and tire marks from soaking in.
Grangerland epoxy flooring questions
Questions Grangerland homeowners ask
Cost, travel, new builds and shops.
How much does epoxy flooring cost in Grangerland, TX?
Epoxy flake floors start from $5 per square foot with a $1,250 minimum. Flake garage floors start at $1,250 for a 1-car, $1,750 for a 2-car, from $2,750 for a 3-car and from $3,750 for a 4-car. The final price depends on the size, the condition of the slab and the finish, and the estimate is free.
Which Grangerland neighborhoods do you coat garages in?
We coat garages in Granger Pines, Granger Pointe, the new Grangerland Meadows community and the older streets around the original townsite, plus shops and detached garages on larger lots, across ZIP codes 77306 and 77302. Call 936-249-6985 with your address and we will confirm it.
Can you coat a shop or detached garage in Grangerland?
Yes. We coat shop, workshop and detached garage floors in Grangerland. Send us the size and what the space is used for and we will quote it.
Can you epoxy a new-construction garage floor?
Yes, and it is a good time to do it. A new slab is clean and unstained. We still diamond-grind it so the coating bonds, then install the same flake and polyaspartic system we use on older floors.
Will an epoxy floor hold up under trucks and trailers?
Yes. The 100% solids epoxy base is thick and strong, and the polyaspartic top coat resists hot-tire pickup. Very heavy point loads, such as a trailer jack, are better on a plate, and we will tell you where that applies.
How long does epoxy last, and will it peel?
Peeling almost always comes from poor surface prep, not from the coating itself. We grind the slab so the epoxy bonds into the concrete, and we back the workmanship with a 5-year warranty.
Can you epoxy an old garage floor in Grangerland?
Yes. We grind off old paint, sealers and stains, repair minor to moderate cracks at no charge and flag anything structural before we start.
What is the difference between epoxy and polyaspartic coatings?
Epoxy is the strong base that bonds to the concrete. Polyaspartic is the clear top coat that resists UV and hot tires. Our flake system uses both.
How do I prepare my garage before you arrive?
Clear out what you can and we handle the rest. We move and protect what remains, grind the slab and repair cracks before coating.
Do you grind the slab in Grangerland, or just roll on a coat?
We diamond grind. On shop slabs and older garage floors around Grangerland, grinding also removes oil, old paint and the weak surface that makes coatings peel.
Is moisture testing important for a Grangerland shop or barn slab?
Yes. Older slabs, barns and shops often have no vapor barrier and can pass moisture up through the concrete. We check the slab and tell you in writing if it needs a different approach before we coat.
Can you coat a patio or porch in Grangerland?
Yes. Patios, porches and walkways get a slip-resistant flake finish with a UV-stable top coat that handles Texas sun and rain.
Nearby
Also serving near Grangerland
Free estimate
Tell us about your floor
A few quick questions and we will call you back, usually the same day.
A floor built for the way you actually use your garage
Call or text 936-249-6985 and we will schedule a free estimate in Grangerland.