Epoxy Flooring · Tomball, TX
Epoxy Flooring in Tomball, TX
Epoxy garage floors, patios, driveways, carports and walkways for Tomball, TX homes. We turn bare slabs into flake floors sealed with a polyaspartic top coat, and put the price in writing before we start.
We install epoxy flake and polyaspartic floors for garages, patios, driveways, carports and walkways in Tomball, TX. Flake floors start at $5 per square foot, every job carries a 5-year workmanship warranty, and estimates are free.
What We Coat in Tomball, TX
Pick your surface
A garage slab, a covered patio and a walkway each need a slightly different plan. Select a surface to see how we handle it.
Garage Floors
One to four car bays
Garage floors are our most common job. We grind the slab, repair cracks and broadcast flake into a 100% solids base, then seal it with a polyaspartic top coat that makes cleanup a breeze.
A 2 car garage runs about 350 square feet, so most start around $1,750. Flake floors start from $5 per square foot with a $1,250 minimum, and you see the full price in writing before we start.
Epoxy Patios
Grip underfoot
A flake patio coating gives a covered patio traction and a finished look. The broadcast flake gives you grip underfoot when it is dry, and the sealed top coat cleans up with a hose.
If you want even more traction, we can add an aggregate to the final coat.
Epoxy Driveways
Built for tires
Driveway slabs take hot tires, oil and weather. We grind and repair the surface, then coat it with the same flake system we use in garages.
Tell us how the drive is used and we will recommend the right finish for tires and wet days.
Carports
Oil drips and weather
Carport slabs are open to the weather and collect drips. A sealed flake floor keeps oil from soaking in and rinses clean.
Minor to moderate cracks get repaired at no charge before we coat, so your new floor bonds to solid concrete.
Walkways
Entries and paths
Walkways and front entries get a flake finish that ties the front of the home together.
The surface is textured for grip and sealed against sun and foot traffic.
Flake Blends
Pick a blend, see it on a real floor
These are photos from our own jobs. Flake comes in many more colors, and we help you choose in person.
How Tomball Got Its Name
A railroad stop that grew into a town
Tomball began as a stop called Peck.
The railroad stop here was first called Peck. In 1907 the name changed to Tomball, honoring Thomas Ball, and the town grew up along the tracks.
In 1933 an oil discovery southwest of town added another chapter. Today the area has long-standing streets and newer construction side by side.
That mix is why our Tomball estimates never start with a product. They start with your slab: its age, its cracks and what the space is used for.
How We Coat a Floor in Tomball, TX
Six steps, all in your written estimate
You see each step before we begin, and nothing hides in a line item called miscellaneous.
- Free Visit and MeasureWe look at the slab, measure the space and walk through flake colors and finish with you.
- Moisture Test and Diamond GrindWe test the slab for moisture, then grind the surface open so the coating bonds instead of peeling.
- Crack RepairMinor to moderate cracks are repaired at no charge and ground flush before coating.
- 100% Solids Epoxy BaseA thick base coat fills and levels the surface.
- Flake BroadcastDecorative flake is thrown by hand for color, texture and grip.
- Polyaspartic Top CoatA clear, UV-stable seal that resists oil, hot tires and scratches.
Cure Clock
When can you use your new floor?
Tap each stage to see what is safe at that point. Times assume a 68 F garage, and your crew lead walks you through it on install day.
Install Day
Our crew finishes the top coat and walks you through the floor. Keep pets, kids and vehicles off.
Foot Traffic
After about 24 hours you can walk on the floor. Keep vehicles and heavy items off for now.
Light Traffic
After about 3 days the floor takes light traffic, so you can start moving things back in.
Full Cure
After about 7 days the floor is fully cured and ready for everyday use.
Cooler or more humid weather can stretch these times.
Local Conditions
What Tomball, TX throws at a floor
The problemMoisture in the air can leave a cold slab damp, and coating over it causes bubbles and peeling.
What we doWe check that the slab stays at least 5.5 F above the dew point and the humidity is under 85 percent before we coat. See the Texas heat guide.
The problemA hot slab makes epoxy set up faster than you can work it.
What we doWe keep application at or below 85 F and mix in batches that fit the roughly 30 minute pot life.
The problemVapor rising through the slab can push a coating off the concrete.
What we doWe test first and tell you what we find. See how moisture testing works.
The problemA fresh pour needs time to cure, and older slabs carry cracks and years of stains.
What we doWe check the age of the slab before we book the day, then repair and grind back to sound concrete. See how long to wait.
Recent Work
Floors we have coated
Tomball, TX Epoxy Questions
Answers Before You Call
Cost, how long it lasts and what to do before we arrive.
Do you coat driveways, carports and walkways as well as garages?
Yes. Besides garage floors we coat epoxy driveways, carports, walkways and patios around Tomball, TX. Outdoor slabs get the same grinding, crack repair and moisture check as a garage, then a sealed flake finish with a slip-resistant texture and a UV-stable top coat.
What does an epoxy flake floor cost to start?
Epoxy flake floors start from $5 per square foot with a $1,250 minimum. A two car garage of about 350 square feet comes to $1,750. Our garage floor cost guide explains what moves the price up or down.
What happens to my slab before any color goes down?
We diamond grind the surface, repair cracks and chips, and check the slab for moisture. Only then does the base coat, flake and top coat go on. Prep is the part you cannot see, and it decides how long the floor lasts.
How soon can I walk on a new epoxy floor and use my garage again?
At 68 degrees Fahrenheit, plan on about 24 hours for foot traffic, about 3 days for light traffic and about 7 days for a full cure. The Cure Clock above walks through each stage.
Is an epoxy patio slippery when it rains?
The finish is slip-resistant. A flake finish gives the surface texture, which helps compared with a smooth painted slab. For extra slip resistance we can also add an aggregate to the top coat, which is worth asking about for patios, walkways and carports that stay wet.
Is my new home slab ready for epoxy?
Fresh concrete has to cure and dry before it takes a coating. Coating too early traps moisture and can cause peeling later. Our guide on how long to wait before epoxy on new concrete shows how to tell when a slab is ready.
Can Texas humidity ruin an epoxy install?
It can if the install is rushed. The coating has to go down when the slab sits at least 5.5 degrees Fahrenheit above the dew point and humidity is under 85 percent, so we measure slab temperature before we start. Read more in our guide to epoxy floors in Texas heat and humidity.
Do you sub out the work?
No. We never sub out the work. Our own crew handles every step from prep to the final coat, so no random crews will show up at your house, and the work carries a 5-year workmanship warranty. Our guide to choosing an epoxy contractor lists the questions worth asking any company.
Can I get a price from photos before anyone visits?
Yes. Send a few photos of the floor and we can give you a first look, then confirm everything in a free written estimate. A quick moisture check and a look at the cracks are part of that visit.
Also Serving Near Tomball, TX
Free estimate
Tell us about your floor
A few quick questions and we will call you back, usually the same day.
Ready When You Are
Let Us Price Your Tomball, TX Floor
Tell us about the space and we will put the full price in writing before any work starts.
- Flake floors from $5 per sq ft
- Workmanship warranty 5 years
- Rated on Google 5.0
- Open daily 7am to 8pm