SOLID COLOR EPOXY · CONROE, TX
Solid Color Epoxy Floors in Conroe, TX
One clean color, edge to edge. A seamless 100% solids epoxy floor for garages, shops and commercial spaces, installed over a slab we grind and repair first.
Try a color. Slide to any shade, then drag the room to turn it.
Preview only. Real floors vary with lighting and the concrete underneath.
SOUND FAMILIAR?
Problems a solid color floor fixes
If your concrete does any of this, one seamless color is a straightforward fix.
Oil, grease and tire stains
Bare concrete is porous and soaks up whatever hits it. Sealed epoxy keeps spills on the surface where you can wipe them off.
Dust that never stops
Raw concrete sheds fine dust onto tools, cars and shelves. A sealed surface stops it.
Cracks and pitted spots
Rough patches look bad and trap dirt. We fill minor to moderate cracks and smooth the slab before the color goes down.
Kits that peel
Store-bought coatings lift when the slab was never opened up. Diamond grinding gives our epoxy something to grip.
A tired, patchy look
Old concrete turns blotchy with stains, patches and old sealer. One uniform color makes the whole space look finished.
Mud and grit everywhere
A bare slab traps tracked-in mud and grit in its pores. A smooth, sealed surface sweeps clean in minutes.
THE BASICS
One color.
No seams.
No flake.
A solid color epoxy floor is a single color of 100% solids epoxy installed over a prepared concrete slab. There is no flake and no metallic swirl, just a smooth, seamless surface in the color you choose.
We install solid color floors for homeowners and businesses across Montgomery County. One of us is on every floor from the first grind to the final walkthrough, and we do not sub anything out.
With no grout lines, spills wipe up and nothing needs scrubbing out of a joint. It is the cleanest look we offer. If you want more grip and texture, flake fits better. If you want a one-of-a-kind look, ask about metallic. We will tell you honestly which suits your space.
- Seamless, no grout lines
- Easy to wipe clean
- Any color you can describe
- Free written estimate
WHERE IT WORKS
Pick your space
These are the spaces we coat in solid color. If yours is not listed, ask us. We will tell you which coating is correct for your goals.
Garages
A bright, uniform floor that handles vehicles, tools and daily use. We grind the slab and repair minor to moderate cracks first.
Shops and workshops
Tools, spills and constant traffic. A seamless epoxy surface sweeps clean and holds up to everyday wear.
Warehouses
100% solids epoxy built for heavy use and nonstop foot traffic in demanding commercial spaces.
Auto dealerships
A clean, glossy finish for showrooms that handles vehicle traffic and daily cleaning.
Laundry rooms
A seamless surface with no grout lines, easy to wipe clean after spills.
Need grip outdoors? For patios and walkways we recommend epoxy flake floors with a polyaspartic top coat built for Texas heat and rain.
Cracks and joints filled before any coating goes downPREP YOU CAN SEE
The color is the last step, not the first
A floor is won or lost before the epoxy comes out. We test the slab for moisture, diamond grind it, fill the cracks and vacuum the pores clean so the epoxy bonds into the concrete instead of sitting on top of it.
That repair is free for minor to moderate cracks with every booking. Foundation cracks are not included, and if we find one we tell you before any work starts.
HOW WE INSTALL IT
Five steps, start to finish
Prep is part of the job, not an add-on you find out about later.
Free estimate
We look at the space and send you a price.
Moisture test and grind
We test the slab, then diamond grind it so the epoxy can bond.
Crack repair
Minor to moderate cracks are repaired, free with every booking.
Moisture barrier
A barrier goes down only if your slab needs one.
Install your color
100% solids epoxy in your color, edge to edge.
QUICK FACTS
Solid color epoxy at a glance
- System
- 100% solids epoxy, one color
- Prep
- Moisture test, diamond grind, crack repair, vacuum
- Moisture
- Barrier only if your slab needs one
- Best for
- Garages, shops, warehouses, dealerships, laundry rooms
- Warranty
- 5 years on our workmanship
- Service area
- Conroe and Montgomery County, plus The Woodlands, Spring, Houston, Humble and Willis
SOLID, FLAKE OR METALLIC?
Which finish fits your floor?
Solid color
- One clean color, edge to edge
- Smooth, seamless surface
- Great for shops and commercial
Epoxy flake
- Full flake broadcast by hand
- Textured finish with more grip
- Polyaspartic top coat
Metallic epoxy
- One-of-a-kind marbled look
- Urethane top coat
- Quoted after we see the space
WHAT IT COSTS
Quoted after we see your space
The price depends on the space, the slab and the color, so we look first and send the number in writing. The estimate is free.
- Free estimate
- Crack repair free with every booking
- 5-year workmanship warranty
- Open daily, 7am to 8pm
SOLID COLOR FAQ
Solid color epoxy questions, answered
What is a solid color epoxy floor?
A solid color epoxy floor is a single color of 100% solids epoxy over a prepared concrete slab, with no flake and no metallic swirl. It gives you a smooth, seamless surface from edge to edge.
What colors can I choose?
Virtually any shade. Tell us the idea you have in mind and we mix the epoxy to match it. Colors look different under different lighting, so we confirm the choice with you before we install.
Where do you install solid color epoxy floors?
We install solid color floors in garages, shops and workshops, warehouses, auto dealerships, laundry rooms and commercial buildings in Conroe, The Woodlands, Spring, Houston and nearby areas.
How do you prep the concrete?
We test the slab for moisture before and after grinding, diamond grind it so the 100% solids epoxy can bond, repair minor to moderate cracks, then vacuum the pores clean. Prep is where a floor is won or lost.
Is crack repair included?
Yes. We repair minor to moderate cracks free with every booking. Foundation cracks are not included.
Do I need a moisture vapor barrier?
Only if the slab needs one. We check the concrete first, then recommend what it needs. If moisture is coming through, a moisture vapor barrier goes under the epoxy. If it is not, we do not add one and you do not pay for it.
Solid color, flake or metallic: which should I pick?
Pick solid color for a uniform, easy-to-clean surface. Pick epoxy flake for texture and grip. Pick metallic for a one-of-a-kind look. We will help you choose when we see your space.
How much does a solid color epoxy floor cost?
We quote solid color floors after we see your space, because the price depends on the size, the slab and the color. The estimate is free and you get one clear price.
Do you offer a warranty?
Yes. Every floor carries a 5-year workmanship warranty, and one of us is on your floor from start to finish.
Can solid color epoxy go over cracked concrete?
We grind the slab and repair minor to moderate cracks before we coat, and that repair is free with every booking. Foundation cracks are not included, and if we see one we will tell you before any work starts.
What areas do you serve?
We serve Conroe, The Woodlands, Spring, Houston, Humble, Willis, Splendora, Porter, New Waverly and Montgomery, plus nearby areas. Call or message us and we will set up a free estimate.
WHERE WE INSTALL
Solid color floors across Montgomery County
KEEP LOOKING
Related floors
FREE ESTIMATE
Tell us where. We will call you.
Takes about a minute. Free and no obligation.
Ready for a clean, solid color floor?
Tell us about your space and we will reply with a free written estimate. Prefer to talk? Call or text any day, 7am to 8pm.