Epoxy flooring in Porter, TX

Epoxy flake floors start from $5 per square foot with a $1,250 minimum. Flake garage floors start at $1,250 for a 1-car, $1,750 for a 2-car, from $2,750 for a 3-car and from $3,750 for a 4-car. The final price depends on the size, the condition of the slab and the finish, and the estimate is free.

Yes. We serve Porter Heights and the rest of ZIP code 77365, including homes near SH 494, FM 1314 and the US-59 corridor.

Paint is a thin film that peels under hot tires. Our system is ground into the concrete with a 100% solids epoxy base, flake and a polyaspartic top coat, so it is far thicker and bonds to the slab.

Yes. We grind off old paint, sealers and stains, repair minor to moderate cracks at no charge and flag structural issues before we start.

Peeling nearly always comes from poor prep. We diamond-grind the slab so the epoxy bonds into the concrete, and we back our workmanship with a 5-year warranty.

For most garages, yes. It resists oil, hot tires and stains, cleans with a mop and makes the garage look finished. It also protects the concrete from spills.

We repair minor to moderate cracks first, at no charge, then coat the slab. If we find a crack that is structural, we flag it before any work begins.

Yes. Metallic epoxy swirls pigment into the coating for a glossy, one-of-a-kind look, and it is popular for garages, game rooms and home gyms.

Most 1 to 2 car garages take about 2 days. Larger spaces take longer, and we confirm the schedule in your estimate.

Epoxy is only as strong as its bond to the concrete. Diamond grinding opens the slab, removes the weak top layer and any old coating, and gives the epoxy something to grip. Skipping or rushing prep is the top reason floors peel, which is why prep comes first in our written estimate.

Line them up by what each one includes: the grind, crack repair, epoxy base, flake, top coat, warranty and square footage. A lower price with fewer items is not the same job. Send us a competing quote and we will walk through what is and is not in it, free.

No. Our 5-year workmanship warranty covers the original customer and does not transfer to a new owner.

Diamond grinding makes dust, so we grind with dust control and finish with an industrial-grade vacuum that clears the pores of the concrete so the coating can bond. It is the most important step on any epoxy garage floor, patio or driveway, and it is what keeps a floor from peeling later.

No. The polyaspartic top coat is part of our standard flake floor and is included in the written price. A flake floor starts at $5 per square foot with a $1,250 minimum, and that price covers grinding, crack repair, 100% solids epoxy, full flake broadcast, the top coat and cleanup.

It means nothing evaporates while the epoxy cures, so what we roll on is what stays on your floor. Thinner paints and kits lose volume as water or solvents leave, which leaves a thinner film. We use 100% solids epoxy for the base.

Polyaspartic is a type of polyurea, and both cure fast. Polyurethane is a different chemistry often used as a clear coat. We use polyaspartic over the epoxy because the top coat stands up to sunlight, scratches and chemicals.

A solid color is one smooth color and shows every speck of dust and every mark. Flake is broadcast into the epoxy so the surface becomes a blend of colors with light texture, which hides dirt and small marks much better.

Flake comes in many blends, and metallic epoxy can be made in virtually any color. We bring samples to the estimate so you can pick in person. The blend you choose is final once material is ordered, though it can usually change before purchase if it is in stock.

Flake hides small stains, patches and color differences well because the blend breaks up the surface. It does not make a rough or damaged slab flat, which is why we grind and repair the concrete first.

The polyaspartic top coat resists scratching, but a heavy item dragged across any floor can leave a mark. Lift and carry, or put pads under workbenches, safes and tool chests.

Yes. Sweeping and an occasional damp mop keep it looking good, because the sealed surface has no pores for dirt to settle into. Wipe spills up when they happen.

Poor prep, moisture in the slab and the wrong conditions cause most failures. We prevent them with a diamond grind, crack repair, a moisture check and weather limits we follow every job, and our own crew does the work with the price and 5-year workmanship warranty in writing.

It is usually a mixing or weather problem. The two parts have to be measured exactly and the conditions have to be right, which is why the slab must be at least 5.5 F above the dew point with humidity under 85 percent. Our crew checks both before any coat goes down.

Air or moisture rising out of the concrete while the coating cures. A moisture check, a proper grind and the right conditions all reduce it.

Yes. We coat floors across Porter and Porter Heights, and our crew also works in nearby New Caney, Kingwood and Valley Ranch. Call or send your address with the estimate form and we will confirm.

You give us access to the area and go about your day. Our own crew grinds, repairs, coats and cleans up, and we tell you what to expect at each step.

Walk on the floor after about 24 hours, return to light traffic after about 3 days, and expect full cure in about 7 days at 68 F.